Signal Conditioning

The USB configuration kit provides a link between the USB port of your PC or Lap-Top and all of our products that use loop communication. The product, as well a...

Rtd, Thermocouple, mV, V, mA and Potentiometer InputIsolated Universal Voltage or Current OutputDual C/O Relay Trip Outputs Universal Power Requirement 22to 250...

SEM1200 LOOP SPLITTER
Two (4 to 20) mA Outputs
Galvanic Isolation 500 V DC Flash Tested 1 KV
High Accuracy 0.05%
12.5 mm Wide
The SEM 1200 isolat...

Accepts RTD, Thermocouple and Slidewire SensorsCurrent (Active or Passive), Voltage Or Bipolar Voltage OutputPowered ( 10 to 32) V AC / (10 to 48) V DC Supply22...

SUITABLE FOR LOAD CELL / STRAIN GAUGE APPLICATIONSUNIVERSAL CURRENT, BIPOLAR VOLTAGE OUTPUTSINPUT RANGE (0.2 to 7.5) mV/V , 5 V EXCITATIONPOWERED (10 to 32) V A...

Pt100,Thermocouple,mV,mA InputDual Relay Outputs 250V AC @ 1ARelay Contacts isolated from each otherGalvanic IsolationSimple USB Configuration PortThe SEM1630 i...

DUAL RELAY OUTPUT WITH INDEPENDENT SET ACTIONS
POWERED FROM (4 to 20) mA LOOP – VOLTAGE BURDEN 5 VOLTS
RELAY RATING 250V AC 1A ; 30V DC 1A
NORMAL AND I...

Dual Channel Voltage or current (Active/Passive)Inputs and Outputs5 Port Isolation To 3.75KvCan be configured as an active signal splitterUser selectable maths ...

(-50 to 50) V or (-50 to 50) mA InputCurrent, Voltage Or Bipolar Voltage OutputAccepts Internal and External Powered Current Loops On Input and Output Powered (...

Pt100,Thermocouple,mV,mA Input(0 to 10), (0 to 5), (2 to 10), (1 to 5) and ( 0 to 1)V DC Output choicesPush Button User Trim For In Process Fine TuningGalvanic ...

Suitable For RTD or Slidewire SensorsHigh, Low,Deviation and Invert Trip ActionsTrip Rating 250 V AC 1A ; 30 V DC 1APowered ( 10 to 32) V AC / (10 to 48) V DC S...

The Status MEDACS Range are being phased out as they are being replaced by the new Status Smart Signal Conditioners.
There are very limited Medacs still avai...

Dual Channel With 5 Port Isolation (3.75Kv)Accepts RTD, Thermocouple or Potentiometer SensorsUniversal Voltage Or Current OutputsMaths Functions Between Channel...

Status SEM1600F
The Status SEM1600F is a cost effective "smart" powered conditioner that accepts all common process pulse signals with a frequency range betw...

SEM1020 LOOP BOOSTER
(4 to 20) mA Output
Galvanic Isolation 500 V DC Flash Tested 1 KV
High Accuracy 0.05%
12.5 mm Wide
The SEM1020 isolator is d...

SEM1015 VOLTAGE / CURRENT CONVERTOR
Accepts DC Voltage Input between (-10 and 100) V DC
(4 to 20) mA Output Loop Powered
Galvanic Isolation 500 V DC Fl...