HOME >> Signal Conditioning >> Loop Isolators

Status SEM1020 Isolating 4 to 20mA Loop Booster


(4 to 20) mA Output
Galvanic Isolation 500 V DC Flash Tested 1 KV
High Accuracy 0.05%
12.5 mm Wide

The SEM1020 isolator is designed for use when power is available at both sides of the isolation barrier.
This isolator requires no user adjustment during commissioning, apart from an initial test, to ensure it operates correctly over its full working range. Minor adjustments can be made to the calibration of the device by means of the two front panel accessible calibration potentiometers. Incorrect connection in the loop will not damage the device as long as the specified maximum currents/voltages are not exceeded.

[1.41058SEM1020.pdf click here to view file attachment]